Top 10 Semiconductor Companies in Japan (2026)
Explore the top semiconductor companies in Japan for 2026, from Tokyo Electron and Advantest to Kioxia and Rapidus, across chips, equipment and materials.

Japan used to rule the chip world. Then, the usual story goes, it lost.
In the late 1980s, Japanese firms sat near the top of every memory ranking. By the 2010s, the headlines had moved to Taiwan, South Korea and the US, and Japan was cast as a fading player that had missed the smartphone era.
That reading was always too narrow. It counted logic chips and ignored the machines, chemicals and wafers that every fab depends on. Look there, and Japan never really left.
Now the picture is shifting again. AI data centres are pulling unprecedented volumes of advanced logic, high-bandwidth memory and NAND flash through the supply chain, and Japanese suppliers are shipping into that demand at record levels. According to the Semiconductor Equipment Association of Japan, sales of Japanese-made chip equipment reached about ¥5.2 trillion in fiscal 2025 and are forecast to rise roughly 26% in fiscal 2026. Meanwhile, Tokyo is backing a domestic 2nm foundry in Hokkaido.
The quiet supplier has become a strategic one.
This guide looks at the top semiconductor companies in Japan for 2026, covering chipmakers, equipment makers and materials suppliers, and what each one does best.
Why Businesses Are Investing in Semiconductors in Japan
Global buyers, investors and governments are paying closer attention to Japan’s chip base for several practical reasons.
Chokepoint Strength in Equipment and Materials
Many Japanese semiconductor companies hold leading or near-sole positions in specific process steps, from photoresist coating to EUV mask inspection and wafer dicing. For fab operators, that makes Japanese suppliers hard to design around.
Direct Exposure to AI Demand
Test, memory and packaging have become bottlenecks in AI hardware. Japanese firms in these areas reported record or near-record results in fiscal 2025, which signals demand rather than speculation.
Government-Backed Capacity
Japan has committed large subsidies to rebuild domestic production, including repeated funding rounds for Rapidus. That support lowers the risk for partners and suppliers building near new fabs.
Supply Chain Resilience
With trade tensions affecting China exposure, many customers want a second, politically stable source. Japan offers mature industrial clusters in Kyushu, Tohoku and Hokkaido, plus deep engineering talent.
Semiconductor Companies in Japan at a Glance
| Rank | Company | Primary Strength | Best For | HQ / Founded |
|---|---|---|---|---|
| 1 | Tokyo Electron | Wafer fab equipment | Coater/developers, etch, deposition | Tokyo / 1963 |
| 2 | Advantest | Automatic test equipment | AI chip and memory testing | Tokyo / 1954 |
| 3 | Shin-Etsu Chemical | Silicon wafers and materials | Wafers, photomask blanks, photoresists | Tokyo / 1926 |
| 4 | Sony Semiconductor Solutions | CMOS image sensors | Mobile, automotive and industrial imaging | Atsugi, Kanagawa / 2016 |
| 5 | Kioxia | NAND flash memory | Enterprise and data centre SSDs | Tokyo / 2017 (as Toshiba Memory) |
| 6 | Renesas Electronics | Microcontrollers and SoCs | Automotive and industrial electronics | Tokyo / 2010 (current form) |
| 7 | Disco | Dicing, grinding, polishing | Thin wafers, HBM and advanced packaging | Tokyo / 1937 |
| 8 | Lasertec | Mask and blank inspection | EUV lithography quality control | Yokohama / 1960 |
| 9 | SCREEN Holdings | Wafer cleaning systems | Wet processing and surface preparation | Kyoto / 1943 |
| 10 | Rapidus | 2nm logic foundry | Leading-edge custom logic | Tokyo / 2022 |
Top 10 Semiconductor Companies in Japan (2026)
Here’s how the leading Japanese semiconductor companies compare, ranked on scale, technology position and recent performance.
1. Tokyo Electron
Tokyo Electron (TEL) was established in 1963 and is headquartered in Akasaka, Tokyo. It’s Japan’s largest chip equipment maker and one of the biggest globally. For the fiscal year ended March 2026, TEL reported record net sales of ¥2,443.5 billion and operating income of ¥624.9 billion. Toshiki Kawai has led the company as president and CEO since 2016.
TEL builds tools for several front-end steps: photoresist coating and developing, plasma etch, thermal processing and deposition, and wet cleaning. Its coater/developers are paired with lithography scanners in fabs worldwide, and industry reporting by TrendForce has put TEL’s share of that segment at nearly 100% when combined with partner litho machines. Management expects DRAM, HBM and advanced logic to drive growth through fiscal 2027.
Key Solutions:
- ✔ Coater/developer systems for EUV and immersion lithography
- ✔ Plasma etch systems for logic and memory
- ✔ Thermal processing and single-wafer deposition
- ✔ Wafer cleaning and surface preparation tools
Best for: Chipmakers needing high-volume front-end process tools across logic, DRAM and NAND.
2. Advantest
Advantest was founded in 1954 as Takeda Riken Industry and took its current name in 1985. Based in Chiyoda, Tokyo, it is a leading maker of automatic test equipment for semiconductors. Group CEO Douglas Lefever took the role in April 2024. In fiscal 2025, ended March 2026, net sales rose 44.7% to ¥1,128.6 billion, while operating income more than doubled to ¥499.1 billion.
As AI processors and HBM stacks grow more complex, testing takes longer and matters more for yield. Advantest’s SoC and memory testers sit at the centre of that shift, and the company says it has roughly tripled production capacity over the past few years. It also supplies SEM metrology tools used in photomask manufacturing. For fiscal 2026, it forecasts sales of ¥1,420 billion.
Key Solutions:
- ✔ SoC test systems for AI accelerators and processors
- ✔ Memory test systems, including high-end DRAM
- ✔ Test handlers and device interfaces
- ✔ SEM metrology and review for photomasks
Best for: Chip designers and OSATs testing high-performance AI and memory devices.
3. Shin-Etsu Chemical
Shin-Etsu Chemical was founded in 1926 as Shin-Etsu Nitrogen Fertilizer and is headquartered in Chiyoda, Tokyo. It reported consolidated net sales of ¥2,573.9 billion for the year ended March 2026. Yasuhiko Saitoh has been president since 2016.
Shin-Etsu is a materials heavyweight rather than a chipmaker. It holds the largest global share in semiconductor silicon wafers, the base on which almost every chip is built, and it also leads in photomask substrates. Its photoresist business, launched in 1997, supplies lithography materials to leading fabs. That spread across wafers and lithography materials gives it a hand in most advanced nodes, and management has said it is focusing development on AI and semiconductor applications.
Key Solutions:
- ✔ 300mm and 200mm silicon wafers
- ✔ Photomask blanks and substrates
- ✔ Photoresists for advanced lithography
- ✔ Silicones and functional electronics materials
Best for: Fabs securing a long-term, high-purity wafer and lithography materials supply.
4. Sony Semiconductor Solutions
Sony Semiconductor Solutions (SSS) began operating in April 2016 as Sony’s dedicated chip company, with its main site in Atsugi, Kanagawa. Sony’s semiconductor work goes back to 1954, and it shipped the first back-illuminated CMOS sensor in 2009 and the first stacked CMOS sensor in 2012. Shinji Sashida became president and CEO in April 2025.
SSS is the core of Sony’s Imaging and Sensing Solutions segment, which posted sales of ¥2,151.5 billion in fiscal 2025, up 20%, with operating income of ¥357.3 billion. Growth came mainly from mobile image sensors for a major smartphone customer. The business also serves automotive cameras, security systems and industrial vision, and Sony expects digital camera sensor sales to rise in fiscal 2026 even as mobile softens.
Key Solutions:
- ✔ Stacked CMOS image sensors for smartphones
- ✔ Automotive and in-cabin sensing chips
- ✔ Security and industrial image sensors
- ✔ Microdisplays and laser diodes
Best for: Device makers that need premium imaging and sensing performance.
5. Kioxia
Kioxia traces its roots to Toshiba, whose engineers invented NAND flash in 1987. The memory unit became Toshiba Memory in 2017, was sold to a Bain Capital-led group in 2018 and took the Kioxia name in October 2019. Headquartered in Minato, Tokyo, it listed on the Tokyo Stock Exchange in December 2024. Hiroo Ota succeeded Nobuo Hayasaka as president in April 2026.
The AI storage boom has transformed Kioxia’s results. Fiscal 2025 revenue rose 37% to about ¥2.34 trillion, with net profit of ¥554.5 billion, and data centre demand has continued to outpace supply into fiscal 2026. Its BiCS FLASH 3D NAND reached 332 layers in 2025, made at Yokkaichi and Kitakami with Sandisk under joint ventures extended to 2034.
Key Solutions:
- ✔ BiCS FLASH 3D NAND memory
- ✔ Enterprise and data centre SSDs
- ✔ Client SSDs and smartphone storage
- ✔ Memory cards and embedded flash
Best for: Hyperscalers and OEMs sourcing high-capacity flash storage.
6. Renesas Electronics
Renesas took its current form in 2010, when NEC Electronics merged with Renesas Technology, itself a 2003 combination of Hitachi and Mitsubishi Electric chip units. Headquartered in Tokyo and led by president and CEO Hidetoshi Shibata since 2019, it reported 2025 revenue of ¥1.321 trillion.
Renesas ranks among the world’s top three microcontroller suppliers and is a major automotive chip vendor through its RH850 MCUs and R-Car SoCs. It has grown through acquisitions of Intersil, IDT, Dialog Semiconductor and design software firm Altium. In 2026 it sharpened its focus, selling its timing business to SiTime in July and booking a large gain in the third quarter, when non-GAAP revenue came to ¥435.2 billion.
Key Solutions:
- ✔ RA, RX and RL78 microcontroller families
- ✔ R-Car SoCs for ADAS and infotainment
- ✔ Analog, power and connectivity devices
- ✔ Renesas 365 design platform with Altium
Best for: Automotive and industrial OEMs building embedded control systems.
7. Disco
Disco was founded in 1937 in Kure, Hiroshima, as an abrasives maker and is now headquartered in Ota, Tokyo. It makes the machines and blades that cut, grind and polish wafers. In the year to March 2026, net sales rose 11.1% to ¥436.9 billion with an operating margin above 42%, its sixth straight year of record sales.
Disco’s tools have become critical as chips get thinner and stacked. Thin wafers for HBM and advanced logic rely on precise grinding and dicing, and the company reported strong shipments to those segments. Its cumulative laser saw shipments passed 4,000 units in February 2026, and its KABRA laser slicing process is widely used in silicon carbide wafer production. Consumable blades and wheels add steady recurring revenue.
Key Solutions:
- ✔ Blade dicing saws and laser saws
- ✔ Wafer grinders and polishers
- ✔ KABRA laser ingot slicing for SiC
- ✔ Dicing blades and grinding wheels
Best for: Memory makers and packaging houses thinning and singulating advanced wafers.
8. Lasertec
Lasertec was founded in 1960 as Tokyo ITV Laboratory and is based in Yokohama. It’s small next to TEL, but it dominates a niche that EUV lithography can’t work without: inspecting masks and mask blanks for defects. In the year to June 2026, net sales came to ¥230.5 billion with an operating margin of 45.7%.
Lasertec introduced the first commercial EUV mask inspection system in 2017, and its EUV mask and blank inspection tools are widely described as near-monopoly products. AI-driven demand for leading-edge chips lifted semiconductor orders by 208.5% to ¥172.2 billion in fiscal 2026, leaving a backlog of ¥322.9 billion. High-NA EUV mask inspection is a current R&D priority, and the company forecasts sales of ¥290 billion for fiscal 2027.
Key Solutions:
- ✔ EUV mask inspection systems
- ✔ EUV mask blank inspection
- ✔ Wafer and SiC inspection tools
- ✔ Laser and confocal microscopes
Best for: Mask shops and foundries running EUV production.
9. SCREEN Holdings
SCREEN traces its roots to a Kyoto printing works founded in 1868 and was incorporated as Dainippon Screen in 1943. It adopted the SCREEN Holdings name in 2014 and remains headquartered in Kyoto. For fiscal 2026, ended March, it reported net sales of ¥605.7 billion and operating income of ¥122.5 billion.
Its semiconductor arm is best known for wafer cleaning, and SCREEN says it holds the largest global share in cleaning systems. The company also makes coat/develop tracks, flash lamp annealers and inspection tools. China and Taiwan together make up about 60% of sales, and management expects advanced packaging and AI-led fab spending to lift fiscal 2027 sales to around ¥725 billion.
Key Solutions:
- ✔ Single-wafer and batch cleaning systems
- ✔ Coat/develop tracks
- ✔ Flash lamp annealing equipment
- ✔ Measurement and inspection systems
Best for: Fabs that need high-yield wet processing at advanced nodes.
10. Rapidus
Rapidus was founded in August 2022 and is headquartered in Chiyoda, Tokyo, backed by Toyota, Sony, NTT, SoftBank, Denso, NEC, Kioxia and MUFG Bank. Its mission is to bring leading-edge logic manufacturing back to Japan. Former Western Digital Japan head Atsuyoshi Koike is president and CEO, and former TEL chief Tetsuro Higashi is chairman.
The company is developing a 2nm gate-all-around process with IBM. Its IIM-1 fab in Chitose, Hokkaido, started a pilot line in April 2025, and Rapidus showed its first 2nm prototype wafers that July. It has since released a pre-release process design kit to early customers and is building a chiplet packaging line at Seiko Epson’s Chitose plant. NEDO approved ¥631.5 billion in government support for fiscal 2026 in April. Rapidus is targeting mass production in the second half of fiscal 2027, although Bloomberg reported on 10 November 2026 that its 2nm SRAM development is running at least several months behind and the timetable could slip.
Key Solutions:
- ✔ 2nm GAA logic foundry services
- ✔ Short turnaround time manufacturing
- ✔ Chiplet and advanced packaging (RCS)
- ✔ Design support via Rapidus Design Solutions
Best for: AI and HPC chip designers seeking a non-Taiwan 2nm source.
How to Choose the Right Japanese Semiconductor Partner
Match the Supplier to the Process Step
Japanese semiconductor companies tend to specialise deeply. Start by mapping which step you need, whether wafers, lithography support, cleaning, test or packaging, and shortlist the firms that lead that step.
Check Node and Roadmap Fit
A tool or material that works at mature nodes may not suit EUV or gate-all-around production. Ask for roadmap commitments covering High-NA EUV, HBM and advanced packaging.
Assess Capacity and Lead Times
AI demand has stretched backlogs at test and inspection specialists. Confirm delivery slots and expansion plans before committing to a fab schedule.
Review Local Support
Service engineers and spare parts near your fab matter as much as the tool itself. Most leaders run offices in Taiwan, South Korea, the US and Europe, but coverage varies.
Weigh Geopolitical Exposure
Export controls on China affect what some suppliers can ship and to whom. Check how a partner’s customer mix and compliance setup could affect your programme.
FAQs
Why do Japanese companies lead in chip equipment but not logic chips?
Japan’s memory makers lost ground to Korean rivals from the 1990s, but its toolmakers and chemical firms kept investing in precision process steps. Those businesses now supply fabs everywhere, while Rapidus is Japan’s attempt to rebuild leading-edge logic.
Which Japanese semiconductor companies benefit most from AI?
Test, memory and packaging specialists have seen the strongest gains. Advantest, Kioxia and Disco all reported record or sharply higher results for fiscal 2025 on AI-related demand.
Is Rapidus producing chips commercially yet?
Not yet. Rapidus is running a 2nm pilot line in Hokkaido and has shared early design kits with customers. It is targeting mass production in the second half of fiscal 2027, though recent reports suggest the schedule may slip.
What about JSR and other materials firms?
Photoresist maker JSR remains a major player, and its ownership is changing: read our report on Mitsui Chemicals’ agreement to buy JSR. Resonac, SUMCO and Kokusai Electric are other notable Japanese chip suppliers.
Conclusion
Japan’s chip story was never just about who makes the most processors. Its strength lies in the tools, wafers and inspection systems the whole industry depends on, and the AI cycle has made that strength easier to see. From Tokyo Electron and Advantest to Lasertec and Disco, these semiconductor companies in Japan hold positions rivals find hard to copy.
The next test is Rapidus and whether Japan can pair its supply chain depth with leading-edge production. For a wider view of the region’s chip base, see our guide to the top semiconductor companies in Malaysia, or explore Japan’s automation leaders in our list of industrial robotics companies in Japan. You can also follow updates directly from Tokyo Electron and Rapidus.








